Action Clutch ACR-3641 – 02-04 Jeep Liberty 3.7L Ironman Sprung (Street) Clutch Kit

Description

Action Clutch ACR-3641 – 02-04 Jeep Liberty 3.7L Ironman Sprung (Street) Clutch Kit

Ironman Unsprung Clutch Kit for Jeep Liberty 2002-2004 3.7L2002-2004 (3.7L)

The Action Clutch Ironman Unsprung kit is engineered specifically for dedicated high powered race vehicles, delivering durability and reliable performance. It features our American Sintered Iron friction material with our Dual clamp load heavy-duty pressure plate that ensures maximum torque holding capacity. The clutch engagement is aggressive with an on/off feel, without introducing clutch chatter. Some light engagement noise and gear rattle may be experienced during operation due to the nature of the product. No compromises are made in this kit, ensuring optimal performance even under extreme conditions. This kit is not intended for street use and should only be used in race applications. At Action Clutch, every kit is quality checked by one of our experienced engineers (with over 60 years of collective experience) and signed off as safe before being released as a finished product. This gives you peace of mind knowing that your Action Clutch will perform consistently every time. NOTE:  Purchasing the wrong type of clutch kit for your specific engine power output can result in premature clutch failure, damage to the transmission and void warranty eligibility. If you’re unsure what kit is right for you, contact Action Clutch direct. 250% INCREASED HOLDING CAPACITY OVER FACTORY KIT SPECIFICALLY ENGINEERED FOR TRACK USE APPLICATIONS ONLY

Clutch Kit Type: Ironman Unsprung Clutch KitPackage Contents: Sprung American Sintered Iron DiscDisclaimer: Increase in holding capacity is rated in Crank Torque, not Wheel TorqueFlywheel Style: Lightened FlywheelBreak-in Care: 500 street miles. Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable). Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.Clutch Disk Model: ACR-IRN-265 1 1/8X10T-RPressure Plate Model: CA1876 REGULAR RRelease Bearing Model: 614093Pilot Bearing Model: SCE-1295Alignment Tool Model: CP9Clutch Disk Diameter: 265Clutch Disk Spline Diameter: 1 1/8Clutch Disk Spline Count: 10